AL 13 DS001 3-Piece Forged Wheels

AL 13 DS001 — 3-Piece Custom Forged Wheel

The AL 13 DS001 is a custom forged 3-piece wheel from AL 13's DS premium series, produced in Brea, California. Three individually engineered components — a forged aluminium disc, a spun outer barrel, and a spun inner barrel — are assembled to the customer's precise offset and width specification using aviation-grade hardware.

The DS designation places the DS001 in AL 13's premium 3-piece lineup, combining the engineering advantages of the 3-piece format — maximum offset range and full serviceability — with a design language developed for the highest-tier custom builds. Every DS001 is made to order; no standard configurations are held in stock.

Available Sizes

The AL 13 DS001 is built to order across a diameter range of 13 inches to 24 inches, with widths from 5J to 14.5J. Because no dimensions are held in stock, every specification — diameter, width, offset, centre bore, bolt pattern — is machined precisely to the customer's requirements.

Diameter range: 13", 14", 15", 16", 17", 18", 19", 20", 21", 22", 23", 24". Extended diameters above 24" may be available as a special order — contact [email protected] to enquire.

Width range: 5J – 14.5J. Custom widths outside this range on request. Offset is fully bespoke — specify your required ET and AL 13 will machine accordingly.

• Diameter: 13" – 24"
• Width: 5J – 14.5J
• Offset: custom ET to specification
• Centre bore: machined to vehicle hub bore
• Bolt pattern: 4×100 to 6×139.7 and non-standard patterns available

Technical Specifications

All AL 13 DS001 wheels are produced at the Brea, California facility. AL 13 controls every stage in-house: forging, CNC machining, finishing, and quality control. No production is outsourced.

The 3-piece assembly uses a fully forged and CNC-machined T6061 aluminium centre disc joined to independently spun outer and inner 6061-T6 aluminium barrels. Machine-threaded aviation-grade fasteners secure the assembly at both flange interfaces. Each barrel depth can be specified independently, enabling precise control of both total width and offset distribution across the inner and outer sections.

The assembled wheel is pressure-tested for airtight barrel sealing before leaving Brea. Because the three components are bolted rather than welded, the wheel is fully serviceable — any individual component can be replaced, refinished, or reconfigured for a different vehicle without replacing the entire wheel. For collectors and long-term enthusiasts this serviceability is a meaningful value proposition over the lifetime of the wheel.

• Material: T6061 forged aluminium alloy (T6 heat treatment)
• Construction: 3-Piece Bolted
• Machining: CNC, multi-axis, in-house
• Finishing: powder coat, anodising, polishing, or custom paint — all in-house
• Load rating: SAE J2530 and TUV equivalent certification
• Centre bore: machined to vehicle specification
• Hardware: stainless steel (colour-match available)

Finish & Color Options

AL 13 performs all finishing in-house at Brea, enabling a broader range of colours and surface treatments than brands that outsource their paint and polish work. Available finish families:

• Brushed — directional linear brush on face, polished or contrasting lip
• Polished — full mirror finish across face, barrels, and hardware
• Gloss Black — hard powder coat, consistent single-colour coverage
• Matte Black — flat powder coat, low-glare, clean stance
• Custom Colour — RAL or Pantone reference matched in powder coat or paint
• Two-Tone — contrasting face and barrel/lip colours
• Anodised — electrochemical colour, permanent and corrosion-resistant
• Chrome — full chrome or selective chrome on face or lip elements
• Custom Milling — pocketing, engraving, or bespoke spoke profiles on request

Standard powder coat: 6–10 week lead time. Polished, chrome, or custom paint: 10–14 weeks. Contact [email protected] with your finish requirements for pricing and lead time.

Vehicle Fitment Guide

The AL 13 DS001 can be configured for virtually any vehicle platform thanks to full custom offset, width, centre bore, and bolt pattern options on every order. Common platforms include:

• Porsche — 911 (991, 992), 718 Cayman/Boxster, Panamera, Cayenne, Macan
• BMW — M2, M3, M4, M5, M8, 5 Series, 7 Series, X5 M, X6 M
• Mercedes-Benz — AMG GT, C63, E63, S-Class, G-Class W463A, GLE 63
• Audi — RS3, RS4, RS6, RS7, R8 V10, TT RS, Q7, Q8 RS
• Ferrari — 296 GTB, F8 Tributo, SF90 Stradale, Roma, 812
• Lamborghini — Huracan EVO/STO, Urus Performante, Revuelto
• Rolls-Royce — Ghost, Phantom VIII, Cullinan, Spectre
• Bentley — Continental GT Speed, Flying Spur, Bentayga EWB
• McLaren — 720S, 765LT, Artura, GT, Senna
• Range Rover — Sport SVR/SVE, Autobiography LWB, Defender V8

For fitment confirmation on your specific vehicle, contact [email protected] with year, make, model, and intended tyre size.

Other Bolt Patterns Available

AL 13 manufactures the DS001 to any bolt pattern. Common configurations ordered through Hodoor World:

• 4×100 — Honda Civic, Mazda MX-5, Toyota GR86, BMW 1 Series E8x
• 5×100 — Subaru WRX/STI, VW Golf Mk4/Mk5, Porsche Boxster 986
• 5×108 — Ford Mustang Shelby, Land Rover Defender, Jaguar F-Type
• 5×112 — Audi, BMW (modern), Mercedes-Benz, VW (modern), Porsche Taycan
• 5×114.3 — Nissan GT-R, Toyota Supra A90, Honda NSX, Ford Mustang S197/S550
• 5×120 — BMW E/F/G-series, Range Rover, Rolls-Royce Ghost/Phantom
• 5×130 — Porsche 911 (991/992), 718, Panamera, Cayenne, Macan
• 6×139.7 — Toyota Land Cruiser 300, Nissan Patrol Y62, Chevrolet Silverado

Non-standard patterns (5×98, 5×115, 5×127, 6×114.3 and others) available on request. Enquire at [email protected].

How the AL 13 DS001 Compares to the AL 13 Range

AL 13 builds four construction types from the same Brea facility using the same T6061 aluminium. Construction choice reflects priorities:

DM for weight and rigidity. DB for wide offset range with clean aesthetics. DT or DS for maximum fitment flexibility and the ability to service individual components over the life of the wheel.

Explore the AL 13 Lineup at Hodoor World

Hodoor World carries the full AL 13 catalogue across all four construction series. Browse related models:

• AL 13 DB001 — 2-Piece Forged
• AL 13 DB009 — 2-Piece Forged
• AL 13 DB010 — 2-Piece Forged
• AL 13 DM001 — Monoblock Forged
• AL 13 DM004 — Monoblock Forged
• AL 13 DT002 — 3-Piece Forged
• AL 13 DT004 — 3-Piece Forged
• AL 13 DS005 — 3-Piece Premium Forged
• AL 13 DS013 — 3-Piece Premium Forged

Need help choosing a model? Contact Hodoor World and we will identify the AL 13 design that best fits your project.

Can't Find the Right Wheel?

If no standard AL 13 model meets your design or fitment requirement, two options are available:

• Custom AL 13 program: AL 13 can engineer a fully bespoke spoke design to your brief. Minimum quantities apply. Contact [email protected] to discuss.
• Other manufacturers: Hodoor World works with dozens of custom forged wheel brands. See our custom wheels page or call +44 748 881 8747.

How to Order

Ordering an AL 13 DS001 through Hodoor World:

1. Email [email protected] with vehicle details (year, make, model, trim), target diameter and width, and finish preferences.
2. We confirm fitment, send a quote, and issue a proforma invoice.
3. Deposit secures your order with AL 13 in Brea, California.
4. Production: 6–10 weeks standard finishes; 10–14 weeks polished or custom paint.
5. We manage shipping from Brea to your door anywhere in the world.
6. Balance settled before dispatch. Phone: +44 748 881 8747.

Frequently Asked Questions

Q: Is the AL 13 DS001 available from stock?
A: No — every DS001 is built to order. AL 13 holds no standard-size inventory. Each wheel is machined to the customer's exact specification, which is why a 6–14 week lead time applies.

Q: What is the production lead time?
A: 6–10 weeks for standard powder coat finishes; 10–14 weeks for polished, chrome, or custom painted finishes. Current lead times vary with production volume — we confirm at time of enquiry.

Q: Can I order larger than 24 inches?
A: AL 13's standard range is 13"–24". Larger diameters may be possible as a special project — contact [email protected] to discuss.

Q: What construction does the AL 13 DS001 use?
A: The DS001 is a 3-piece bolted wheel from AL 13's DS premium series. A forged T6061 aluminium disc is assembled with separate outer and inner spun aluminium barrels using aviation-grade hardware. The three-piece format delivers the widest offset and width range in the AL 13 catalogue and the wheel is fully serviceable — individual components can be replaced or refinished without replacing the entire wheel.

Q: Does Hodoor World ship internationally?
A: Yes — UK, EU, UAE, Australia, Japan, Hong Kong, USA, and all major markets. Import duties are the buyer's responsibility. Shipping costs are quoted with each order.

Q: What warranty covers these wheels?
A: AL 13 provides a structural warranty against manufacturing defects. Full terms are provided at order confirmation. The warranty does not cover road damage, improper installation, or cosmetic wear.

Discover Hodoor World

Hodoor World is a UK-based specialist in custom forged wheels, body kits, and performance parts for luxury and exotic vehicles. We supply customers across Europe, the Middle East, Asia, and North America, working directly with brands including AL 13 Wheels, Brixton Forged, and Vossen.

Every product we list is genuine, with confirmed fitment data and professional support throughout your order. Read customer reviews on Trustpilot. Contact us at [email protected] or +44 748 881 8747.

Wheel Care

Protecting your AL 13 DS001 investment:

• Cleaning: pH-neutral, non-abrasive wheel cleaner applied with a soft microfibre cloth or brush. Acid-based cleaners damage powder coat and polished aluminium — avoid them.
• Frequency: Clean every 1–2 weeks or after track use. Brake dust is corrosive; do not allow it to bake onto the surface.
• Polished surfaces: Apply metal polish or wheel sealant every 3–6 months. This maintains gloss and creates a barrier against moisture and oxidation.
• Powder coat: Annual inspection for chips or abrasion. Touch up bare aluminium immediately to prevent corrosion from taking hold.
• Winter/salt: Rinse with fresh water after every drive on treated roads. Salt accelerates corrosion at any exposed metal or joint.
• Torque: Re-torque wheel nuts or bolts after the first 50–100 km post-fitment and at each tyre rotation or service. Use vehicle manufacturer's specification.
• Storage: Off-vehicle storage should be in a cool, dry, dark environment. Tyre bags protect rubber from UV degradation.

AL 13 DS001 — International Delivery

Hodoor World ships AL 13 DS001 wheels to customers worldwide. Estimated transit after production completion:

• United Kingdom: 3–5 business days. See custom forged wheels UK guide.
• Germany: 4–6 business days. See custom wheels Germany guide.
• France: 4–6 business days. See custom wheels France guide.
• UAE / Dubai: 5–8 business days. See custom wheels UAE guide.
• Australia: 7–12 business days. See custom wheels Australia guide.
• Japan: 7–10 business days. See custom wheels Japan guide.
• USA: 3–5 business days (domestic from Brea, CA). See custom wheels USA guide.

All shipments fully insured and tracked. Duties and local taxes are the buyer's responsibility. Contact [email protected] or +44 748 881 8747 for a shipping quote.