305 Forged UF/2-128
305 Forged UF2-128 — Precision Engineering from Miami
The 305 Forged UF2-128 is a fully forged 2-piece wheel from the UF/2 series — a forged 6061-T6 face bolted to a custom-depth barrel, allowing concave profiles that a monoblock cannot achieve. The UF2-128 features 8-spoke two-piece forged face with stepped inner spoke ledge and custom concave barrel, built to any diameter, width, offset, and bolt pattern to suit your build.
Design Language & Engineering: UF2-128
The step detail on each UF2-128 spoke is a single-plane inset — the spoke face drops 4mm at a point approximately 65% of spoke radius from the hub, then continues at the lower level to the barrel interface. The resulting step creates a shadow line that runs continuously around the face at that radius, producing an implied concentric ring within the spoke field. At 22-inch diameter, this shadow ring sits at approximately 180mm from wheel centre — at the visual midpoint of the face as perceived from a standard viewing angle, maximising its presence in the composition.
The barrel on the UF2-128 is produced with a standard concave depth of 55–65mm for typical GT fitments, extended to 80–110mm for low-offset luxury SUV configurations. At maximum depth the face recedes approximately 100mm from the lip plane — a geometry that produces strong concave shadow under most lighting conditions and maximises the perceived three-dimensionality of the wheel from the external view. The two-piece bolt ring on the UF2-128 uses a wider-than-standard flange to accommodate the eight spoke roots, with M8 fastener spacing adjusted to maintain consistent pre-load across the assembly.
Recommended Finishes for the UF2-128
Gloss Black with Machined Step Lines: The shadow line created by the spoke step is the defining feature of the UF2-128 — a diamond-cut machined strip along the step face edge in gloss black converts this shadow into a reflective accent. The bright machined edge against the black spoke body creates a strong graphic element visible from outside the vehicle at normal road distances.
Deep Concave Polished Barrel with Satin Face: Maximising the barrel depth and polishing the inner barrel surface produces a mirror-effect concave that reflects the road, tyre, and caliper colours — an effect most visible in the large-diameter fitments (22"–24") for which the UF2-128 was optimised. The satin spoke face prevents the wheel from becoming too busy when combined with the polished barrel.
Bronze with Gloss Barrel Lip: A satin bronze spoke face with a polished lip (outer barrel edge only) creates a two-element finish visible from the front view — the spoke colour and the bright lip ring. Popular for Bentley Continental and Rolls-Royce Ghost fitments where the period-authentic two-tone look references classic wheel design.
Available Sizes
- Diameters: 13" | 14" | 15" | 16" | 17" | 18" | 19" | 20" | 21" | 22" | 23" | 24"
- Widths: 8.0J–13.5J (custom — any barrel width machined to your specification)
- Construction: 2-piece fully forged
- PCD options: 5x112, 5x114.3, 5x120, 5x130, 5x150, 5x108, 5x120.65, 6x139.7 — center-lock on request
- Offset (ET): Fully custom — any ET to suit your suspension geometry; the UF2-128's 8-spoke 8-spoke design accommodates a wide range from aggressive negative offsets to high positive ET for luxury sedan fitments
- Popular sport fitments: 21×11.5 ET60 for Lamborghini Huracán EVO RWD, 22×10.5 ET15 for Ferrari 488 Pista Spider, 21×12 ET52 for Lamborghini Urus S, 20×10.5 ET20 for McLaren 765LT Spider
Fitment note: Every UF2-128 is built around your specific car. Send your make, model, year, brake package, and desired stance to [email protected] — fitment confirmed within 24 hours.
We also offer an AI Wheel Design Service if you want a custom spoke pattern or finish concept designed before production begins.
Technical Specifications
- Manufacturing: 2-piece fully forged — forged face section (6061-T6 aerospace aluminum) bolted to a custom-depth flow-formed barrel; hardware is titanium-grade, the interface is sealed and precision-machined
- Material: 6061-T6 aerospace-grade forged aluminum
- Design: UF2-128 — 8-spoke two-piece forged face with stepped inner spoke ledge and custom concave barrel
- Spoke count: 8 primary spokes — the same wheel serves both sides without mirroring.
- Weight advantage: Two-piece construction allows custom barrel depth without weight penalty — the face mass is fixed, only barrel length changes
- Hub bore: Custom-machined hub-centric to your vehicle specification — no spigot rings or adapters required
- Available Widths: 8.0J–13.5J — custom barrel width machined per order
- Center cap: 305 Forged branded aluminum center cap, finish-matched to your ordered wheel color
- Build lead time: 4–8 weeks from confirmed order and deposit
- Origin: Designed and manufactured by 305 Forged, Miami, FL, USA
Finish & Color Options
- Brushed: Brushed Aluminum, Brushed Titanium, Brushed Bronze, Brushed Gunmetal, Brushed Gold
- Gloss: Gloss Black, Gloss White, Gloss Anthracite, Gloss Candy Red, custom paint codes
- Matte: Matte Black, Matte Gunmetal, Matte Bronze, Matte Anthracite
- Polished: Full polished lip, polished face, two-tone combinations
- Premium: Custom color matching to factory or wrap codes on request
All finishes applied at 305 Forged's Miami facility. Finish samples available before production confirms.
Vehicle Fitment Guide — Common Platforms
Built to order for any application — PCD, offset, and brake clearance confirmed before production:
- Tesla: Model S (Plaid, Long Range), Model 3 (Performance), Model X, Model Y Performance
- BMW: M3 (G80), M4 (G82/G83), M5 (F90/G90), M8, X5 M, X6 M, 7 Series (G70)
- Mercedes-AMG: C 63, E 63, S 63, G 63 (W463/W464), GT 63 4-Door, GLE 63
- Audi: RS3, RS4, RS5, RS6 Avant, RS7, R8 V10, RS Q8, SQ8
- Porsche: 911 (991/992), Cayenne, Panamera, Macan, Taycan
- Lamborghini: Huracán (EVO, STO), Urus (Performante, S)
- Lexus: LC 500, LS 500, LX 600, IS 500 F Sport
- Rolls-Royce & Bentley: Ghost, Wraith, Cullinan; Continental GT, Bentayga
Contact [email protected] — fitment confirmed within 24 hours.
Other Bolt Patterns — Built to Your Specification
- 5x112 — Mercedes-AMG, Audi, Volkswagen Touareg, Porsche (5-lug variants)
- 5x120 — BMW M-series (G-platform), Rolls-Royce, Bentley Continental
- 5x114.3 — Tesla Model 3/Y, Nissan GT-R, Lexus LC/LX, Infiniti
- 5x130 — Porsche 911 (991/992), Cayenne, Panamera
- 5x150 — Lexus LX 600, Toyota Land Cruiser 300
- 5x108 — Ferrari 458/488/F8, Aston Martin, Maserati
How the UF2-128 Compares to the 305 Forged Range
| Series | Construction | Best For | Weight |
|---|---|---|---|
| UF (Ultimate Forged) | 1-piece monoblock forged | Lightest single-piece build, widest design range | Lightest |
| UF/2 (Two-Piece UF) | 2-piece fully forged | Deep concave, wider lip options, custom barrel widths | Light |
| UFL (Ultimate Forged Lite) | 2-piece (forged center + flow-formed barrel) | Premium look at a more accessible price point | Light |
| FT (Flow Technik) | Flow-formed monoblock | Broad fitment range, in-stock options, performance value | Medium |
The UF2-128 sits in the UF/2 Two-Piece tier — fully forged face with independently specified barrel depth — the deepest concave options in the 305 Forged lineup.
Explore the 305 Forged Lineup at Hodoor World
- 305 Forged UF128 — asymmetric 8-spoke monoblock, staggered spoke pairing
- 305 Forged UF119 — flagship UF monoblock, refined multi-spoke face
- 305 Forged UF101 — the original Ultimate Forged monoblock
- 305 Forged UF/2-101 — entry two-piece forged, custom barrel depth
- 305 Forged FT108 — Flow Technik series, flow-formed monoblock
- Browse all forged wheels at Hodoor World
Can't Find the Right Wheel? Order Custom Forged
If this model isn't quite right for your build, Hodoor offers a custom forged wheel manufacturing service. Send us any reference image or sketch, and we manufacture the wheel fully forged from 6061-T6 aluminum in any size, color, and bolt pattern. You can also use our AI Wheel Design Service to visualise your concept before production begins. Contact us at [email protected] or WhatsApp +44 7488 818747.
How to Order
- Send your car details — make, model, year, brake package, and preferred finish to [email protected] or WhatsApp +44 7488 818747.
- Fitment quote within 24 hours — we confirm diameter, width, offset, brake clearance, and hub bore for your exact vehicle.
- Invoice and deposit — production starts once confirmed; balance due before shipping.
- Build lead time 4–8 weeks — tracked from first day of production.
- Shipping to your door — fully insured, worldwide delivery with tracking.
Frequently Asked Questions
What makes the UF2-128 different from other UF/2-series wheels?
UF/2-128 pairs an 8-spoke stepped face with the deepest available concave barrel in the UF/2 lineup — the stepped inner ledge on each spoke adds a second machined plane that only becomes visible at angles below wheel centerline.
Is the UF2-128 non-directional?
The UF2-128 is a non-directional design — the same wheel serves both sides without mirroring.
What vehicles does the UF2-128 fit best?
The UF2-128's 8-spoke 8-spoke design works well on luxury and sport platforms. Popular fitments include 21×11.5 ET60 for Lamborghini Huracán EVO RWD and 22×10.5 ET15 for Ferrari 488 Pista Spider. As a custom build-to-order wheel, it adapts to any vehicle — contact us for exact fitment advice.
What sizes are available?
Diameters 13"–24", widths 8.0J–13.5J, any offset and PCD. Hub bore is custom-machined hub-centric — no spacers or adapters needed.
How long does production take?
4–8 weeks from confirmed order and deposit. Rush production may be available — ask at [email protected].
Can I see a finish sample before ordering?
Yes — 305 Forged provides finish samples prior to production. Specify your preferred finish at enquiry and a sample is arranged before the order is confirmed.
What is the "stepped face" detail? Each spoke features a 4mm inset plane at 65% of spoke radius — a machined step that creates a shadow line at mid-spoke. This is a standard production feature on all UF2-128 wheels, not an upgrade option.
Can the barrel depth be specified to exceed 100mm? Yes — custom barrel depths up to 120mm are achievable on the UF2-128. Provide vehicle inner arch measurement and preferred ET at order stage; 305 Forged will calculate the maximum achievable depth without arch contact.
Discover Hodoor World: Your Ultimate Car Customization Destination
Hodoor World is the UK's premier destination for forged wheels, body kits, and performance upgrades from the world's leading brands. Our team of specialists sources and ships globally, with a focus on custom-order products that are built to your exact specification. We work with 305 Forged, Brixton, Vossen, Forgiato, Lexani, and over 50 other wheel brands.
Leave a review on Trustpilot after your purchase — we read every one.
Wheel Care — 2-Piece Forged
Forged aluminum wheels require minimal maintenance but benefit from regular attention to preserve the finish:
- Clean with pH-neutral wheel cleaner and soft microfibre — avoid acid-based or alkaline products
- Rinse thoroughly after motorway driving in winter (road salt accelerates surface oxidation)
- Inspect for kerb marks seasonally — minor surface scratches can be polished out; deeper marks should be repaired before moisture ingress
- Re-torque wheel bolts to spec after the first 50–100 km following fitment
- Store unmounted wheels vertically on padded pegs — never stack horizontally (face distortion risk)
305 Forged UF2-128 — International Delivery
Hodoor World ships 305 Forged wheels worldwide from our UK warehouse. Standard delivery times: UK 3–5 days, Europe 5–10 days, USA/Canada 7–14 days, UAE/GCC 5–7 days, Australia/Asia 10–18 days. All shipments are fully insured and tracked. Import duties where applicable are the buyer's responsibility — contact us for a landed cost estimate to your country. Email [email protected] or WhatsApp +44 7488 818747.
