305 Forged UF134 Wheels

305 Forged UF134 — Precision Engineering from Miami

The 305 Forged UF134 is the only wheel in the Ultimate Forged series with a genuinely directional spoke geometry. Each of the seven spoke bodies is twisted through a rotational offset as it extends from hub to barrel — the spoke base angles trail, while the spoke tip leads, creating a consistent swept-spoke appearance that communicates rotational motion even at standstill.

The twist angle is held at approximately 12 degrees of rotational offset across the full spoke length — measurable, consistent, and repeatable across every UF134 produced at the 305 Forged Miami facility. This precise twist angle is computed to produce the maximum perceived motion effect while remaining within the torsional load limits for a 7-spoke monoblock structure. The CNC programming for the UF134 spoke profile requires a 5-axis simultaneous toolpath rather than the 3+2 axis approach used for non-directional spoke profiles.

Because the UF134 is directional, staggered sets must be ordered as mirror pairs — a driver-side set and a passenger-side set with the spoke sweep oriented correctly for each position. 305 Forged produces both orientations from the same forging blank, with the directional twist cut during the CNC finish stage. Lead time for a complete staggered mirror set is identical to a single set order.

Available Sizes

• Diameters: 13" | 14" | 15" | 16" | 17" | 18" | 19" | 20" | 21" | 22" | 23" | 24"
• Widths: 8.0J–13.5J (custom — any barrel width machined to your specification)
• Construction: 1-piece monoblock forged
• PCD options: 5x112, 5x114.3, 5x120, 5x130, 5x150, 5x108, 5x120.65, 6x139.7 — center-lock on request
• Offset (ET): Fully custom — any ET to suit your suspension geometry
• Popular fitments: 21×10.5 ET20 for Porsche 911 Turbo S (992), 20×10 ET25 for BMW M4 Competition xDrive, 22×10 ET30 for Lamborghini Urus Performante, 21×10.5 ET38 for Ferrari Purosangue

Fitment note: Every UF134 is built around your specific vehicle. Send your make, model, year, brake package, and desired stance to [email protected] — fitment confirmed within 24 hours.

We also offer an AI Wheel Design Service if you want a custom spoke pattern or finish concept designed before production begins.

Design Language & Engineering: UF134

A 12-degree spoke twist over the full hub-to-barrel spoke length corresponds to a spoke-tip displacement of approximately 28mm tangentially on a 20" wheel at the spoke mid-radius. This displacement is large enough to be clearly visible as a swept form from any normal viewing angle, but small enough that the spoke maintains its fundamental radial orientation — the UF134 does not look like a turbine fan but like a wheel whose spokes have been precisely turned to suggest forward motion.

Seven spokes at approximately 51-degree spacing with the directional twist create a face where every spoke appears individually active — contributing its own swept geometry to the overall impression rather than blending into a symmetric pattern. This individual spoke legibility is one of the reasons 7 spokes is the optimal count for a twisted directional design: fewer spokes makes the sweep too sparse, and more spokes merges the twisted elements into a near-continuous vortex form.

Recommended Finishes for the UF134

Gloss Black with Polished Spoke Faces: The twisted spoke faces of the UF134 rotate into and out of the light source as the wheel turns. A polished spoke face on a gloss black structure maximises this rotational highlight effect — the polished surfaces flash as they rotate through the light plane, creating a stroboscopic brightness that is unique to directional twisted spokes.

Brushed Gunmetal: Brushed gunmetal across the full face softens the twist geometry to a single tonal statement. The brushed direction on each spoke face is oriented radially, meaning the brush lines run from hub to barrel and emphasise the spoke length rather than its rotational position — creating a disciplined, precision-engineering aesthetic.

Carbon Graphite with Satin Barrel: Carbon graphite on the twisted spoke faces with a satin-finish barrel creates a dark, purposeful specification suited to GT applications — Porsche 911 Turbo S, Ferrari Purosangue — where the wheel should read as a serious performance component rather than a visual statement. The directional twist is still fully legible at this finish level.

Technical Specifications

• Manufacturing: 1-piece monoblock forging — 6061-T6 aerospace billet forged under a 5,000-ton press and 5-axis CNC finish-machined to final spoke profile at 305 Forged's Miami facility
• Material: 6061-T6 aerospace-grade forged aluminum
• Design: UF134 — 7-spoke twisted face with per-spoke rotational offset from hub to barrel, requiring mirror-paired sets
• Spoke count: 7 spokes
• Weight advantage: Monoblock construction typically 15–25% lighter than a cast equivalent; no barrel-to-face seam, no bolted hardware
• Hub bore: Custom-machined hub-centric to your vehicle specification — no spigot rings or adapters required
• Available Widths: 8.0J–13.5J — custom barrel width machined per order
• Center cap: 305 Forged branded aluminum center cap, finish-matched to your ordered wheel colour
• Build lead time: 4–8 weeks from confirmed order and deposit
• Origin: Designed and manufactured by 305 Forged, Miami, FL, USA

Finish & Colour Options

• Brushed: Brushed Aluminum, Brushed Titanium, Brushed Bronze, Brushed Gunmetal, Brushed Gold
• Gloss: Gloss Black, Gloss White, Gloss Anthracite, Gloss Candy Red, custom paint codes
• Matte: Matte Black, Matte Gunmetal, Matte Bronze, Matte Anthracite
• Polished: Full polished lip, polished face, two-tone combinations
• Premium: PVD coatings, custom colour-matching to factory or wrap codes on request

All finishes applied at 305 Forged's Miami facility. Finish samples available before production confirms.

Vehicle Fitment Guide — Common Platforms

Built to order for any application — PCD, offset, and brake clearance confirmed before production:

• Tesla: Model S (Plaid, Long Range), Model 3 (Performance), Model X, Model Y Performance
• BMW: M3 (G80), M4 (G82/G83), M5 (F90/G90), M8, X5 M, X6 M, 7 Series (G70), iX
• Mercedes-AMG: C 63, E 63, S 63, G 63 (W463/W464), GT 63 4-Door, GLE 63, GLS 63
• Audi: RS3, RS4, RS5, RS6 Avant, RS7, R8 V10, RS Q8, e-tron GT RS
• Porsche: 911 (991/992), Cayenne, Panamera, Taycan
• Lamborghini: Huracán (EVO, STO, LP 640-4), Urus (Performante, S)
• Rolls-Royce & Bentley: Ghost (EWB), Phantom, Cullinan, Wraith; Continental GT Speed, Flying Spur, Bentayga (S, Speed, EWB)
• Ferrari: 812, SF90, F8 Tributo, 488, Purosangue

Contact [email protected] — fitment confirmed within 24 hours.

Other Bolt Patterns — Built to Your Specification

• 5x112 — Mercedes-AMG, Audi, Volkswagen Touareg, Porsche (5-lug variants)
• 5x120 — BMW M-series (G-platform), Rolls-Royce, Bentley Continental
• 5x114.3 — Tesla Model 3/Y, Nissan GT-R, Lexus LC/LX, Infiniti
• 5x130 — Porsche 911 (991/992), Cayenne, Panamera
• 5x150 — Lexus LX 600, Toyota Land Cruiser 300
• 5x108 — Ferrari 458/488/F8, Aston Martin, Maserati

How the UF134 Compares to the 305 Forged Range

The UF134 sits in the Ultimate Forged tier — fully forged monoblock, maximum design freedom, lightest single-piece construction.

Explore the 305 Forged Lineup at Hodoor World

• 305 Forged UF128 — asymmetric 8-spoke monoblock, structured split-spoke face
• 305 Forged UF121 — Y-spoke split with double inner tines, ten visible spoke elements
• 305 Forged UF123 — 10-spoke mesh face, highest spoke count in the UF monoblock lineup
• 305 Forged UF134 — directional 7-spoke twisted face, per-spoke rotational offset
• 305 Forged UF/2-101 — two-piece forged, custom barrel depth for deep concave builds
• Browse all forged wheels at Hodoor World

Can't Find the Right Wheel? Order Custom Forged

If this model isn't quite right for your build, Hodoor offers a custom forged wheel manufacturing service. Send us any reference image or sketch, and we manufacture the wheel fully forged from 6061-T6 aluminum in any size, colour, and bolt pattern. You can also use our AI Wheel Design Service to visualise your concept before production begins. Contact us at [email protected] or WhatsApp +44 7488 818747.

How to Order

1. Send your car details — make, model, year, brake package, and preferred finish to [email protected] or WhatsApp +44 7488 818747.
2. Fitment quote within 24 hours — we confirm diameter, width, offset, brake clearance, and hub bore for your exact vehicle.
3. Invoice and deposit — production starts once confirmed; balance due before shipping.
4. Build lead time 4–8 weeks — tracked from first day of production.
5. Shipping to your door — fully insured, worldwide delivery with tracking.

Frequently Asked Questions

What makes the UF134 different from other UF-series wheels?
directional 7-spoke twisted face — the only UF series wheel with a per-spoke rotational offset from hub to barrel, producing genuine implied motion even on a stationary vehicle.

Is the UF134 directional?
The UF134 is a directional design — requiring mirrored driver/passenger pairs to preserve spoke orientation.

What vehicles does the UF134 fit best?
The UF134's 7-spoke design works well across a wide range of performance and luxury platforms. Popular fitments include 21×10.5 ET20 for Porsche 911 Turbo S (992) and 20×10 ET25 for BMW M4 Competition xDrive. As a custom build-to-order wheel, it adapts to any vehicle — contact us for exact fitment advice.

What sizes are available?
Diameters 13"–24", widths 8.0J–13.5J, any offset and PCD. Hub bore is custom-machined hub-centric — no spacers or adapters needed.

How long does production take?
4–8 weeks from confirmed order and deposit. Rush production may be available — ask at [email protected].

Can I see a finish sample before ordering?
Yes — 305 Forged provides finish samples prior to production. Specify your preferred finish at enquiry and a sample is arranged before the order is confirmed.

Discover Hodoor World: Your Ultimate Car Customisation Destination

Hodoor World is the UK's premier destination for forged wheels, body kits, and performance upgrades from the world's leading brands. Our team of specialists sources and ships globally, with a focus on custom-order products built to your exact specification. We work with 305 Forged, Brixton, Vossen, Forgiato, Lexani, and over 50 other wheel brands.

Leave a review on Trustpilot after your purchase — we read every one.

Wheel Care — 1-Piece Monoblock Forged

Forged aluminum wheels require minimal maintenance but benefit from regular attention to preserve the finish:

• Clean with pH-neutral wheel cleaner and soft microfibre — avoid acid-based or alkaline products
• Rinse thoroughly after motorway driving in winter (road salt accelerates surface oxidation)
• Inspect for kerb marks seasonally — minor surface scratches can be polished out; deeper marks should be repaired before moisture ingress
• Re-torque wheel bolts to spec after the first 50–100 km following fitment
• Store unmounted wheels vertically on padded pegs — never stack horizontally (face distortion risk)

305 Forged UF134 — International Delivery

Hodoor World ships 305 Forged wheels worldwide from our UK warehouse. Standard delivery times: UK 3–5 days, Europe 5–10 days, USA/Canada 7–14 days, UAE/GCC 5–7 days, Australia/Asia 10–18 days. All shipments are fully insured and tracked. Import duties where applicable are the buyer's responsibility — contact us for a landed cost estimate to your country. Email [email protected] or WhatsApp +44 7488 818747.