Custom Body Kit for Audi RS e-tron GT — Wide Body, Carbon Fibre and Forged Wheels

Why Audi RS e-tron GT Owners Choose Custom Body Kits

The RS e-tron GT represents Audi's electric performance flagship — a dual-motor grand tourer producing up to 646 hp in overboost, capable of 0–100 km/h in 3.3 seconds with zero tailpipe emissions. Its J1 platform architecture, shared with the Porsche Taycan, delivers a low centre of gravity and near-perfect weight distribution. The sweeping fastback silhouette is already striking, but targeted aerodynamic enhancements can refine both its visual drama and high-speed stability.

At Hodoor World, we specialise in bespoke body kit design and manufacture for the Audi RS e-tron GT. Every project begins with a detailed consultation — our engineering team works from 3D scans of the Audi RS e-tron GT's body panels to ensure millimetre-precise fitment. Whether you are after a subtle OEM-plus enhancement or a full wide body conversion, the result is a kit engineered specifically for your vehicle, manufactured in-house and shipped to your door anywhere in the world.

Wide Body Kit Options for Audi RS e-tron GT

Wide body treatment on the RS e-tron GT requires a nuanced approach given its already broad 1,964 mm width. Subtle fender extensions of 20–40 mm per side, sculpted to follow the car's complex surface language, add visual mass without disrupting the aerodynamic efficiency that electric range depends upon.

Our wide body kits for the Audi RS e-tron GT are available in fibreglass, polyurethane (PU) or pre-preg carbon fibre, depending on your budget and intended use. Each kit is developed using CAD modelling and prototype fitment on a physical Audi RS e-tron GT, guaranteeing that panel gaps, wheel clearances and suspension geometry are accounted for before production begins. The kits ship with all necessary mounting hardware and a detailed fitting guide.

Carbon Fibre Components for Audi RS e-tron GT

Carbon fibre is particularly relevant on an EV platform where weight reduction directly improves both range and handling. A full carbon aero package — front splitter, side blades, rear diffuser and boot spoiler — can save 8–12 kg compared to equivalent fibreglass parts while offering superior stiffness.

All Hodoor World carbon fibre parts are manufactured using autoclave-cured pre-preg layup for maximum strength-to-weight ratio. We offer both 2x2 twill and forged carbon finishes, with clear-coat UV protection as standard. Every component is test-fitted to a reference Audi RS e-tron GT before shipping. Browse our body kit collection for available carbon options.

Front Bumper and Lip Upgrades

The RS e-tron GT's sealed front end (no traditional grille) provides a clean surface for aerodynamic additions. A deeper front splitter with integrated canards channels air around the body more effectively, while carbon fibre accents around the Singleframe grille surround add visual depth.

Hodoor World offers both full bumper replacements and bolt-on lip kits for the Audi RS e-tron GT. Full bumper assemblies retain all factory sensor and camera provisions — parking sensors, ACC radar and washer nozzles mount in their original positions. For owners who prefer a less invasive modification, our clip-on splitter and lip kits install without any drilling or permanent alteration to the factory bumper.

Rear Diffuser and Spoiler Options

Rear aerodynamic options include an extended diffuser that works with the car's flat underbody, a blade-style or ducktail spoiler on the boot lid and carbon trim around the tail lamp housing. Since there are no exhaust outlets, the diffuser design is purely aerodynamic, resulting in cleaner, more purposeful lines.

All rear aerodynamic components are wind-tunnel validated using CFD simulation, ensuring they generate genuine downforce rather than serving as purely cosmetic additions. Mounting is engineered to use existing factory attachment points wherever possible, simplifying installation and preserving the option to revert to stock.

Side Skirts and Fender Flares

Side skirt extensions on the e-tron GT follow the car's pronounced rocker panel crease, deepening the shadow line and lowering the visual stance. Carbon fibre or colour-matched side blades channel air from the front wheel arches toward the rear, improving aerodynamic balance.

Our side components are designed as a system — skirts, fender flares and door blade accents share consistent design language so the Audi RS e-tron GT reads as a cohesive build rather than a collection of separate parts. Colour-matching to factory Audi paint codes is available on all fibreglass and PU components, with turnaround typically within 10 business days.

Custom Forged Wheels for Audi RS e-tron GT

The RS e-tron GT's 21 or 22-inch forged wheels must balance visual drama with the low rolling resistance that preserves EV range. Lightweight flow-formed or fully forged options in aero-optimised spoke patterns can reduce rotational mass by up to 6 kg per corner while maintaining the grand touring aesthetic.

Hodoor World partners with leading forged wheel manufacturers to offer a curated selection of designs suited to the Audi RS e-tron GT. Every wheel is made to order with your choice of diameter, width, offset and finish. We handle hub-centric boring, bolt pattern verification and TPMS compatibility — you receive a set ready to mount and drive. Explore our forged wheel collection for current designs.

Installation and Fitment Guide

Every Hodoor World body kit ships with a comprehensive installation manual including step-by-step photography, torque specifications and recommended sealant products. Our kits are designed for professional installation at any competent body shop — no custom fabrication is required. Typical installation time ranges from 8 to 16 hours depending on the scope of the build.

For clients who prefer a turnkey solution, we maintain a network of approved installation partners across Europe, the Middle East and North America. Contact us at [email protected] and we will connect you with a certified installer in your region.

How to Order from Hodoor World

Ordering your custom Audi RS e-tron GT body kit is straightforward. Email [email protected] with your vehicle details — model year, colour code, current modifications and reference images of your desired outcome. Our design team will respond within 48 hours with a detailed proposal, 3D renders and pricing.

We ship worldwide to over 40 countries via insured freight, with typical delivery times of 10–21 business days depending on destination. All kits are double-crated for transit protection, and we provide full tracking from our facility to your door. Payment is available via bank transfer, credit card or cryptocurrency.

Frequently Asked Questions

How long does it take to produce a custom body kit for the Audi RS e-tron GT?
Production time is typically 4–8 weeks from design approval, depending on the complexity of the kit and the materials selected. Rush orders may be available — contact [email protected] for current lead times.

What materials are available for Audi RS e-tron GT body kits?
We offer fibreglass (FRP), polyurethane (PU) and pre-preg autoclave carbon fibre. Fibreglass suits budget-conscious builds, PU provides impact resistance for daily drivers, and carbon fibre delivers the ultimate weight saving and visual appeal.

Will the body kit affect my Audi RS e-tron GT warranty?
Body kit installation is a cosmetic modification that does not alter the engine, transmission or electronic systems. In most jurisdictions, dealerships cannot void your warranty for cosmetic changes alone. However, we recommend consulting your local dealer for region-specific guidance.

Do you ship Audi RS e-tron GT body kits internationally?
Yes. Hodoor World ships to over 40 countries worldwide via insured freight. All kits are double-crated for protection during transit, and full tracking is provided from our facility to your delivery address.

Can I order individual components instead of a full kit?
Every component — front splitter, side skirts, fender flares, rear diffuser, spoiler — is available individually. Many clients start with a front lip and mirror caps, then add further pieces over time. Email [email protected] for individual component pricing.