Nessen S 6.0
Nessen S 6.0 — Precision 2-Piece Forged Wheels from the USA
The Nessen S 6.0 is a bespoke two-piece forged wheel crafted in the United States. Its architecture separates the forged face from the spun aluminium barrel, allowing precise offset adjustment at the assembly stage — a significant advantage for wide-body builds, flush fitment, or any application requiring an unusual backspacing. Each set is built to order for the specific vehicle and specification.
Available Sizes
- Diameters: 13" | 14" | 15" | 16" | 17" | 18" | 19" | 20" | 21" | 22" | 23" | 24"
- Widths: 5J through 14.5J (custom per build)
- Offset: Fully custom ET — specify at order
- PCD / Bolt Pattern: Any bolt pattern available — 4×100, 5×100, 5×112, 5×114.3, 5×120, 5×130, and all custom patterns
- Center Bore: Custom hub-centric bore machined to your vehicle
Need a Different Size?
Every Nessen S 6.0 is built to order, so no size is off the table. Whether you need an aggressive wide-body width, deep concave profile, or an unusual PCD not listed above, contact the Hodoor team and we will coordinate the custom specification directly with Nessen. We also offer an AI Wheel Design Service if you want a custom spoke pattern or finish concept designed before production begins.
Technical Specifications
- Construction: 2-Piece forged — separate forged face and precision-spun aluminium barrel
- Material: 6061-T6 forged aluminium face; high-strength aluminium barrel
- Assembly: Face and barrel joined with aerospace-grade hardware; offset adjusted at assembly stage
- Finish Options: Gloss Black, Matte Black, Brushed Silver, Brushed Gunmetal, Polished, Custom powder coat or paint — all finishes applied in-house
- Country of Origin: United States of America
- Available Diameters: 13" | 14" | 15" | 16" | 17" | 18" | 19" | 20" | 21" | 22" | 23" | 24"
- Available Widths: 5J–14.5J
- Weight: Varies by size; the two-piece forged process delivers best-in-class strength-to-weight ratio for the diameter
- Hardware: Titanium or stainless steel hardware available on request
Why Choose Nessen Forged?
Founded in the United States in 2011, Nessen Forged was built around a single principle: produce the highest quality bespoke wheels without compromise. Every wheel leaves their facility only after exhaustive quality control. The S 6.0 exemplifies this ethos — its spoke geometry is engineered for both visual proportion and structural integrity, striking a balance that factory wheels cannot achieve at equivalent weight targets. Nessen does not maintain shelf inventory; every set is purpose-built for its owner's vehicle.
The two-piece construction of the Nessen S 6.0 provides an additional advantage: offset can be fine-tuned during assembly before final hardware torque. This means a single set of faces can accommodate different cars or changes in suspension geometry without requiring a completely new wheel. The hardware joining face to barrel is aerospace grade and torqued to specification by Nessen technicians before the wheel ships.
Variants and Configuration Options
The Nessen S 6.0 is available in the following configurations:
- Two Piece (TS) — two-piece construction with a forged face and spun aluminium barrel — allows precise offset adjustment
Each configuration is machined individually to your specified depth and offset — contact us to discuss the exact profile that suits your build.
Watch the Nessen S 6.0 in Action
Vehicle Fitment Guide
The Nessen S 6.0 has been fitted across a wide range of platforms, from European sports cars to American muscle and Japanese tuner builds. Common applications include BMW 3 Series, BMW M3/M4, Mercedes C-Class and E-Class, Porsche 911, Audi S4/S5, Nissan 370Z and GT-R, Ford Mustang and Shelby GT500, and Chevrolet Corvette. Because Nessen builds to order, fitment is confirmed at specification stage — there are no off-the-shelf compromises.
Other Bolt Patterns Available
Every Nessen wheel is custom-drilled, which means no bolt pattern is a problem. Common patterns include 4×100, 4×108, 5×100, 5×108, 5×112, 5×114.3, 5×120, 5×130, and 6×139.7. If your vehicle uses an unusual PCD, Nessen can accommodate it — discuss your specification with the Hodoor team at the time of enquiry.
Nessen S 6.0 vs. Comparable Forged Wheels
| Feature | Nessen S 6.0 | Standard Aftermarket Forged | OEM Forged |
|---|---|---|---|
| Construction | 2-Piece forged billet | Cast or flow-formed | Cast alloy |
| Custom sizing | Yes — fully bespoke | Limited catalogue sizes | Fixed OEM sizes |
| Finish options | Unlimited custom finishes | Standard catalogue finishes | OEM colours only |
| Country of origin | USA | Asia (typically) | Varies |
| Hub-centric bore | Yes — custom machined | Generic with adapters | Yes |
| Structural integrity | Forging grain flow | Lower tensile strength | Cast grain structure |
Nessen Forged Lineup
- Nessen S 5.0 — five-spoke monoblock in clean, minimal form
- Nessen S 5.1 — refined five-spoke with a distinctive spoke face
- Nessen S 5.2 — five-spoke with fluid spoke geometry
- Nessen S 5.3 — five-spoke available in Standard, Step Lip, and Concave variants
- Nessen S 5.4 — five-spoke with a bold spoke face and multiple lip options
- Nessen S 7.0 — seven-spoke with bold depth and wide fitment range
- Nessen S 7.1 — seven-spoke variant with refined taper toward the centre
- Nessen S 7.2 — seven-spoke with alternative width and spoke proportion
- Nessen S 8.0 — eight-spoke layout for a symmetrical aggressive stance
- Nessen S 9.0 — nine-spoke design with refined spoke geometry
- Nessen S 10.0 — ten-spoke delivering symmetrical presence at any width
- Nessen S 15.0 — multi-spoke design for a dense, premium wheel face
- Nessen V 10.0 — V-series with distinctive split-spoke character
- Nessen R 10.0 — R-series motorsport forged with precision-machined spokes
- Nessen R 10.1 — R-series evolution with a refined spoke and lip profile
- Browse all forged wheels at Hodoor World
Can't Find the Right Wheel?
Hodoor offers a custom forged wheel manufacturing service for customers who need a design that falls outside any brand's existing catalogue. From spoke count and depth to finish and hardware, every detail is specified by you. You can also use our AI Wheel Design Service to visualise your concept before production begins.
How to Order Nessen S 6.0 Wheels
- Specify your vehicle — make, model, year, and suspension setup (stock or modified)
- Choose diameter and width — staggered or square, front and rear individually
- Select your configuration — from the variants listed above
- Choose your finish — from the standard palette or request a custom colour
- Confirm PCD and offset — hub-centric bore is machined to spec
- Place your order through Hodoor — lead time is typically 8–12 weeks from deposit
Frequently Asked Questions — Nessen S 6.0
Are these wheels made in the USA?
Yes. Nessen Forged is a US-based manufacturer and all wheels are produced in the United States.
What is the lead time?
As a build-to-order wheel, lead time is typically 8–12 weeks from deposit confirmation. Exact timing depends on finish complexity and current production schedule.
Can I order a staggered setup?
Yes. Front and rear diameter, width, and offset are specified independently. Staggered fitments are standard practice for Nessen.
What finishes are available?
Gloss Black, Matte Black, Brushed Silver, Brushed Gunmetal, and Polished are standard. Custom powder coat, anodising, and paint-to-sample are available on request.
Are these flow-formed or fully forged?
The Nessen S 6.0 is fully forged — not flow-formed or cast. This gives the wheel superior strength and a lower weight for its size compared to cast alternatives.
Will these fit my car?
Fitment is confirmed at specification stage. Provide your vehicle details and Nessen will engineer the exact offset, bore, and PCD for a hub-centric fit with no adapters required.
Can I mix diameters front and rear?
Yes — staggered setups are fully supported. Specify your desired front and rear diameter and width independently, and Nessen will engineer each end to the correct offset for optimal clearance and stance.
What payment and ordering process does Hodoor use?
Orders are placed through the Hodoor World enquiry system. A deposit is required to start production; the balance is due before shipping. Our team will guide you through every step, including fitment verification, finish confirmation, and delivery scheduling.
Discover Hodoor World
Hodoor World is a specialist marketplace for custom and forged wheels, bringing together the world's leading brands and manufacturers in one place. Explore our full catalogue of forged wheels, check fitment guides for your vehicle, and get in touch with our team for personalised recommendations. Visit us at hodoor.world — or read verified customer reviews on Trustpilot.
Wheel Care and Maintenance
Forged aluminium wheels benefit from regular care to preserve their finish and structural integrity. After every wash, dry the wheels thoroughly to prevent water spots, especially on polished or brushed surfaces. Avoid acidic wheel cleaners — use pH-neutral products only. For painted or powder-coated finishes, a light coat of carnauba wax provides additional protection. Inspect the mounting surfaces and hardware torque at every service interval. If any surface damage occurs, consult a specialist before returning the wheel to service.
International Delivery Available
Hodoor World ships Nessen S 6.0 wheels worldwide. All wheels are packed in manufacturer-spec crating with full insurance. Import duties and taxes may apply depending on your destination country — contact our team for a delivery quote and lead time estimate to your location. We ship to Europe, North America, the Middle East, Asia, and Australia.
