Modular Velge MR-222 AERO 3-Piece Forged Wheels

Modular Velge MR-222 AERO — 3-Piece Forged Wheels from the USA

The Modular Velge MR-222 AERO is a 3-piece forged wheel engineered by MV Forged in the United States. Each centre, outer lip, and inner barrel is individually machined from TÜV-rated 6061-T6 aerospace-grade aluminium billet, then assembled using aerospace-grade fasteners. Proprietary spoke pocketing — the controlled removal of material from non-structural spoke surfaces — reduces unsprung mass without compromising the load-bearing cross-section. Every set is produced to customer specification: diameter, width, offset, PCD, and finish are all defined at the time of order, giving precise fitment across European and American luxury performance vehicles.

Available Sizes — Modular Velge MR-222 AERO 3-Piece Forged

• Diameters: 19" | 20" | 21" | 22" | 23" | 24"
• Available Widths: Custom per vehicle specification (any width available)
• PCD: All bolt patterns — 5×112, 5×120, 5×114.3, 5×130, 5×108, and more
• Offset (ET): Custom — matched to suspension geometry and desired stance
• Centre Bore: Vehicle-specific hub boring available

Need a Different Size?

The MR-222 AERO is produced entirely to order — there are no fixed stock sizes. If your vehicle requires a diameter, width, or offset not listed above, contact Hodoor World with your vehicle details and we will coordinate the exact specification with MV Forged. Wide-body and staggered fitments are readily accommodated through the 3-piece construction, which allows independent adjustment of the lip width and spoke centre. We also offer an AI Wheel Design Service if you want a custom spoke pattern or finish concept designed before production begins.

Technical Specifications — Modular Velge MR-222 AERO

• Construction: 3-Piece Lightweight Forged
• Material: 6061-T6 aerospace-grade aluminium billet (TÜV rated)
• Finish: Fully custom — any colour, polish level, or two-tone combination
• Country of Origin: USA (MV Forged)
• Certification: TÜV rated — tested for structural integrity and road use
• Available Widths: Any (specified per order)
• Diameters: 19"–24"
• Optional Upgrades: Full hidden bolts; Grade 5 Torx titanium bolts, studs and nuts; MV Forged carbon fibre centre caps

MR-222 AERO — Construction and Engineering

The AERO designation within the Modular Velge range identifies the brand's highest-specification 3-piece platform. Unlike a monoblock or 2-piece forged wheel, the 3-piece architecture separates the face, inner barrel, and outer lip into three independently machined components. This approach unlocks a degree of width and offset customisation that is structurally impossible in a single-piece design — the lip section can be deepened or narrowed without retooling the spoke centre, making the AERO the preferred choice for wide-body fitments and staggered axle configurations. The spoke geometry of the MR-222 AERO employs MV Forged's pocketing technique: material is milled from the back faces and undercuts of each spoke, targeting zones where the finite element analysis confirms zero structural contribution. The result is a lighter wheel with no reduction in rated load capacity, translating to reduced rotational inertia, improved acceleration response, and better suspension compliance.

Finish Options — MR-222 AERO

The MV Forged custom finish programme covers every aesthetic direction for the MR-222 AERO:

• Gloss and Satin Colours — powder coat or liquid paint in any RAL, Pantone, or OEM reference
• Brushed and Machine-Polished Surfaces — directional brushing or high-gloss machine polish on spokes and barrels
• Two-Tone and Contrast Designs — contrasting face and lip, or spoke and barrel colour combinations
• Matte and Textured Coatings — matte black, matte graphite, structured powder, and bead-blast textures
• Custom Paint Matching — colour-matched to your vehicle body or a specific OEM wheel finish

Optional Hardware — MR-222 AERO

Hardware upgrades are specified at the time of order:

• Full Hidden Bolts — outer lip fasteners fully concealed for a clean, bolt-free face profile
• Grade 5 Torx Titanium Hardware — bolts, studs, and nuts; saves weight and resists corrosion
• MV Forged Carbon Fibre Centre Caps — lightweight, finish-matched, engraved MV logo

Vehicle Fitment Guide — Modular Velge MR-222 AERO

The MR-222 AERO targets high-performance and luxury vehicles across the 19–24 inch diameter range:

• BMW M3 (G80), M4 (G82), M5 (F90/G60), M8 (F91/F92), M2 (G87)
• BMW X5 M (F95/G05), X6 M (F96/G06), X7 (G07), iX (I20)
• Mercedes-Benz AMG GT (C190/R190), E 63 AMG (W213/W214), S 63 AMG (W223)
• Mercedes-Benz GLE 63 AMG (W167), GLS (X167), G 63 AMG (W463/W464)
• Porsche 911 (992), Cayenne Turbo (9YA), Panamera (971), Taycan (J1)
• Audi RS6 Avant (C8), RS7 Sportback, RS Q8, R8 V10 (4S) — 5×112
• Lamborghini Huracán EVO, Urus — 5×112 and 5×130
• Bentley Continental GT (3W/3S), Flying Spur (3W), Bentayga (4V)

Other Bolt Patterns Available

Because the MR-222 AERO is produced to order, any PCD can be specified: 5×112 (BMW/Audi/Mercedes), 5×120 (BMW/Land Rover), 5×114.3 (Infiniti/Lexus/Ford), 5×130 (Porsche/Bentley), 5×108 (Ferrari/Jaguar/Volvo), 5×100, 5×127 (Cadillac/Jeep), 6×139.7 (truck/SUV), and others. Contact Hodoor World with your vehicle's PCD for drilling confirmation before ordering.

Modular Velge MR-222 AERO vs Comparable 3-Piece Wheels

Modular Velge Lineup

• Modular Velge MR-102 AERO — 3-piece forged, pocketed spoke, aerospace alloy
• Modular Velge MR-111 DUO — 2-piece forged, lightweight double-disc construction
• Modular Velge MR-155 PERFORMA — 3-piece forged performance series
• Modular Velge RR-100 MONO — monoblock forged single-piece construction
• Modular Velge MR-222 AERO — 3-piece AERO wide-body fitment forged
• Modular Velge MR-181 PERFORMA — 3-piece PERFORMA high-performance forged
• Browse all forged wheels at Hodoor World

Custom Forged — Can't Find the Right Wheel?

If the MR-222 AERO spoke profile or standard size range does not suit your build, Hodoor offers a custom forged wheel manufacturing service where spoke geometry, barrel design, and finish are specified entirely from scratch. Minimum orders and lead times apply. You can also use our AI Wheel Design Service to visualise your concept before production begins.

How to Order — Modular Velge MR-222 AERO

1. Specify your build — diameter, width, offset, finish, and hardware options
2. Provide vehicle details — make, model, year, current fitment or target stance
3. Receive a quote — Hodoor World confirms pricing, lead time, and finish details
4. Confirm and pay — production begins on cleared payment
5. Worldwide delivery — tracked shipping; international orders accepted

FAQ — Modular Velge MR-222 AERO

How long does production take for the MR-222 AERO?

Standard finish specifications typically require 8–12 weeks from order confirmation. Complex custom finishes or non-standard PCDs may add 2–4 weeks to the lead time. Contact Hodoor World for a current estimate before placing your order.

Can I replace a single damaged wheel?

Yes. MV Forged produces wheels to order, so a single replacement is possible provided you can supply the original specification — diameter, width, offset, PCD, and finish reference. Where MV Forged has records from the original order, this process is straightforward.

Is TÜV certification included for all configurations?

TÜV certification covers the wheel construction method and alloy specification. Load ratings specific to diameter and width may vary. Hodoor World can confirm the certification scope for your chosen configuration prior to purchase.

Can I have the lip polished and the face painted in a different colour?

Yes — two-tone finishes combining a polished or chrome lip with a contrasting painted face are a standard option in the MV Forged finish programme. Specify this at the time of order.

What happens if the wheel is kerbed?

A significant advantage of 3-piece construction is that a kerbed or damaged lip can be replaced independently of the spoke centre. A new lip section is sourced and fitted at far lower cost than replacing the entire wheel — an economic advantage that benefits the owner over the life of the wheel.

Discover Hodoor World

Hodoor World is an authorised retailer for MV Forged and other leading forged wheel brands. Every product listing is verified for specification accuracy and our team has direct manufacturer support for fitment queries. Browse the full forged wheels collection or use the vehicle search to find wheels matched to your build.

Read verified customer reviews on Trustpilot. Contact us at [email protected] or visit the contacts page.

Wheel Care — MR-222 AERO

Maintaining a custom-finished 3-piece forged wheel correctly preserves both appearance and structural integrity:

• Cleaning: pH-neutral wheel cleaner only — avoid acid-based products on polished lips or chrome surfaces
• Drying: Dry with a microfibre cloth after washing to prevent water marking on polished alloy
• Hardware checks: Inspect and re-torque barrel fasteners annually; replace corroded titanium hardware promptly
• Storage: Store off-vehicle in a cool, dry environment; use wheel bags to prevent finish contact damage
• Lip damage: Kerbed lips are replaceable — contact MV Forged via Hodoor World for a replacement lip quote before discarding the wheel

International Delivery

Hodoor World ships the MR-222 AERO worldwide, including the UAE, UK, EU, Australia, and the GCC region. Import duties and taxes apply to international orders and are the responsibility of the buyer. Contact [email protected] or visit the contacts page for a delivery estimate to your country.