PUR RY-50 Titan Series Forged Monoblock Wheels

PUR RY-50 — Titan Series Forged Monoblock

The PUR RY-50 is a one-piece forged monoblock from PUR Wheels' Titan Series — a collection engineered for vehicles where maximum spoke presence and visual aggression are the primary design objectives. The RY-50 takes the Y-spoke architecture to its most assertive expression: wide spoke bases, aggressive taper, and deep barrel geometry that pushes the face forward to the tyre shoulder. Forged from T6061-T6 aircraft aluminium billet, built entirely to order in Vancouver.

Available Sizes

• Diameters: 13" | 14" | 15" | 16" | 17" | 18" | 19" | 20" | 21" | 22" | 23" | 24"
• Available Widths: 5J–14.5J (custom widths available to order)
• Offsets: Custom ET — any positive, zero, or negative offset engineered to your vehicle's geometry
• Bolt Patterns: 5×112, 5×120, 5×130, 5×114.3, 5×108, and all custom PCDs
• Centre Bore: Machined hub-centric for your vehicle — no spigot ring adapters required

Need a Different Size? The RY-50 is a fully made-to-order wheel, so any diameter, width, or offset combination achievable within PUR's engineering parameters can be produced for your specific application. Contact the Hodoor team to discuss your fitment requirements before placing an order. We also offer an AI Wheel Design Service if you want a custom spoke pattern or finish concept designed before production begins.

Technical Specifications

• Construction: One-piece forged monoblock (T6061-T6 aircraft-grade aluminium billet)
• Series: Titan Series — titan-focused design from PUR Wheels
• Manufacturing: Custom forged to order — no stocked inventory
• Diameters: 13" through 24"
• Available Widths: 5J–14.5J
• Design: Aggressive y-spoke titan series monoblock built for maximum impact
• Finish Options: Polished, brushed, anodised, powder-coated, two-tone — unlimited custom options
• Hardware: Titanium hardware upgrade available
• Lead Time: 8–16 weeks custom production
• Certifications: TÜV, JWL, VIA (configuration-dependent)

PUR RY-50 — Titan Series Maximum Spoke Presence

The Titan Series is PUR's most aggressive design family, developed for owners who want a wheel that commands attention. The RY-50 achieves this through a Y-spoke form where the spoke width is maximised relative to the inter-spoke openings — a proportion that reads with authority on wide-body builds, large-diameter fitments, and high-ride applications. Despite the aggressive visual, every RY-50 is produced to the same T6061-T6 forging standard as PUR's most refined Luxury models: the engineering does not change with the design language. PUR can be reached at [email protected] or +1 604-279-5563 to configure your RY-50 build.

Vehicle Fitment Guide

The PUR RY-50 is specified for wide-body builds, lifted trucks and SUVs, and large-platform performance vehicles where maximum wheel presence is the goal. Common applications include wide-body Lamborghini Urus (5×130), Rolls-Royce Cullinan (5×120), Mercedes-Benz G 63 AMG (5×130), Cadillac Escalade wide-body builds (6×139.7 available), RAM 1500 TRX (5×139.7), Ford F-150 Raptor R (6×135), and GMC Denali full-size builds (6×139.7). Contact the Hodoor team to confirm tyre sizing, offset, and barrel depth for your chassis.

Other Bolt Patterns Available

The RY-50 can be produced in any bolt pattern required. Standard configurations include 5×112 (Mercedes-Benz, Audi, Volkswagen, BMW M-series, Lamborghini), 5×120 (BMW 5/7 Series, Rolls-Royce, Range Rover), 5×130 (Porsche 911, Cayman, Boxster, Cayenne, Bentley), 5×114.3 (Lexus, Infiniti, Ferrari California, Acura NSX), and 5×108 (Ferrari 458, F8 Tributo, Maserati Quattroporte). Dual-drilled patterns and custom PCDs outside this list are available on request. Confirm your vehicle's exact PCD and centrebore with the Hodoor team before finalising.

PUR RY-50 vs. Comparable Forged Monoblocks

PUR Titan Series — Complete Collection Lineup

• PUR LP-30 Luxury Series — open-lattice forged monoblock for luxury-sport fitment
• PUR LE-12 Luxury Series — intricate web-spoke forged monoblock, ornate surface detail
• PUR LD-09 Luxury Series — large-face monoblock with commanding centre section
• PUR LF-05 Luxury Series — flowing five-spoke luxury monoblock, sculpted concave profile
• PUR SM-34 Signature Series — radial multi-spoke forged monoblock for sport-luxury platforms
• PUR SS-35 Signature Series — structured multi-spoke monoblock, sport-luxury balance
• PUR SY-30 Signature Series — Y-spoke monoblock, aerodynamic spoke architecture
• PUR RP-20 Titan Series — aggressive Titan forged monoblock for performance builds
• PUR RY-50 Titan Series — maximum-presence Y-spoke Titan monoblock
• PUR 4OUR Heritage Series — four-spoke Heritage monoblock with motorsport roots
• PUR RS02 RS Series — RS Heritage monoblock, confirmed Lamborghini Aventador fitment
• PUR RS05 Heritage Series — RS-line Heritage monoblock, timeless performance proportions
• Browse all forged wheels at Hodoor World

Can't Find the Right Wheel? Custom Forged Solutions

The PUR RY-50 showcases what is possible within an established design language, but if your project requires a completely bespoke spoke architecture, Hodoor offers a custom forged wheel manufacturing service through its network of specialist producers. Whether you need an entirely new design concept, an unusual finish, or an engineering solution for an extreme fitment, the Hodoor team can source a path forward. You can also use our AI Wheel Design Service to visualise your concept before production begins.

How to Order the PUR RY-50

To order the PUR RY-50 through Hodoor World, provide your vehicle make, model, year, and the fitment specification you are targeting — diameter, width, preferred offset, PCD, and centrebore. The Hodoor team will confirm the full specification with PUR, advise on current lead time, and walk you through available finish options. Once all details are agreed, payment is processed by bank transfer, card, or cryptocurrency, and your wheels are tracked and insured door-to-door from PUR's Vancouver production facility to your address worldwide.

Frequently Asked Questions

Is the PUR RY-50 available off the shelf?
No. The RY-50 is produced entirely to order — PUR holds no finished inventory. Every wheel is forged and machined to the buyer's exact specification after the order is confirmed. Lead time is typically 8 to 16 weeks. This made-to-order approach is what allows unlimited size and finish customisation.

What alloy is used in the PUR RY-50?
T6061-T6 aerospace aluminium billet — the same alloy grade used in aircraft structural components. The T6 heat treatment process maximises the alloy's strength-to-weight ratio, giving the RY-50 better fatigue characteristics than standard cast alloy wheels at equivalent or lower weight.

Can PUR produce the RY-50 with titanium hardware?
Yes. Titanium bolts and valve stems are an available upgrade for any PUR custom order. Titanium hardware reduces unsprung rotational mass compared to steel alternatives and provides better corrosion resistance in wet climates. Specify at order time — it cannot be added retrospectively without rebalancing.

What finish options are available for the RY-50?
PUR accommodates brushed, polished, anodised, powder-coated, and multi-tone treatments. Two-tone builds typically involve a clear anodised base layer plus a secondary colour process. Custom colour-matched finishes are available — consult the Hodoor team or PUR directly at [email protected] for feasibility and lead time implications of complex finishes.

Does the RY-50 carry a warranty?
PUR warrants their forged wheels against manufacturing defects in materials and workmanship. Full warranty terms are provided at the point of purchase. For specific coverage questions, contact [email protected] or the Hodoor World team.

What is the difference between the PUR Titan Series and the other PUR lines?
PUR organises its catalogue into four series: Luxury (ornate, prestige-focused designs), Signature (sport-luxury balance), Titan (maximum visual aggression), and Heritage (motorsport-influenced classic proportions). The RY-50 belongs to the Titan Series — designed specifically for owners who want aggressive Y-spoke Titan Series monoblock built for maximum impact. If your priority differs, the Hodoor team can help identify the most appropriate PUR model for your build.

Discover Hodoor World

Hodoor World is a global marketplace for premium and bespoke wheels, connecting enthusiasts and collectors with specialist manufacturers across North America, Japan, and Europe. Every brand on Hodoor is verified, every listing is curated, and every order is supported by concierge service from specification through delivery. Explore the full catalogue at hodoor.world and read independent customer reviews on Trustpilot.

Wheel Care & Maintenance

Maintain the PUR RY-50's finish by washing with a pH-neutral, non-abrasive wheel cleaner and a soft spoke brush after every drive in wet or salty conditions. Remove brake dust before it bonds to the finish surface — ferrous deposits are corrosive to all aluminium alloy finishes regardless of coating. Rinse thoroughly and apply a ceramic coating or quality wax to polished and anodised surfaces after cleaning. For significant damage or finish restoration, consult a wheel refurbisher experienced with forged alloy before attempting DIY repair.

PUR RY-50 — International Delivery

Hodoor World ships PUR wheels to customers worldwide. All orders are fully insured, customs-documented, and tracked door-to-door from PUR's Vancouver production facility to your address. Import duties and local taxes vary by destination country and are the buyer's responsibility. Standard delivery regions include North America, the United Kingdom, Western Europe, the Middle East, Japan, South Korea, Singapore, Australia, and New Zealand. For orders outside these standard regions, contact the Hodoor team before placing to confirm shipping feasibility and cost. All wheels are professionally crated and palletised for safe international transit.