LUMMA CLR 24 RS Forged Wheels

LUMMA CLR 24 RS Forged Wheels — Maximum Presence, German Engineering

The LUMMA CLR 24 RS is a statement monoblock forged wheel engineered for SUVs where presence commands attention. Produced by LUMMA Design GmbH in Winterbach, Germany, the CLR 24 RS reaches the top of the standard premium SUV fitment range at 24 inches — a diameter reserved for builds where every visual element is pushed to its maximum. Developed especially for high-technology SUV and extra-class tuning conversions, it carries TÜV firmness and part certification for European road use.

Available Sizes — LUMMA CLR 24 RS

• Diameters: 18" | 19" | 20" | 21" | 22" | 23" | 24"
• Available Widths: 9J | 9.5J | 10J | 10.5J | 11J | 11.5J | 12J
• PCD: 5×112, 5×120 — others on request
• Offset (ET): ET 15 to ET 45 deliverable
• Centre Bore: 66.6 – 74.1 mm (vehicle-specific)
• Primary diameter: 24"

Need a Different Size?

LUMMA Design CLR 24 RS wheels are produced to order. If the standard 24-inch configuration requires a different offset or width for your specific vehicle, contact Hodoor World and we will arrange the specification with LUMMA Design. We also offer an AI Wheel Design Service if you want a custom spoke pattern or finish concept designed before production begins.

Technical Specifications — LUMMA CLR 24 RS

• Construction: Monoblock forged (1-piece)
• Design: RS-spec large-diameter profile, engineered for 24-inch fitments
• Material: High-strength aluminium alloy forged billet
• Country of Origin: Germany (LUMMA Design GmbH, Winterbach, BW)
• Certification: TÜV firmness certificate and part certificate
• PCD Options: 5×112 & 5×120 standard; others on request
• Offset Range: ET 15 – ET 45 deliverable
• Available Widths: 9J – 12J
• Diameters: 18" – 24"

Engineering a 24-Inch Forged Wheel

Producing a structurally sound forged monoblock at 24-inch diameter is a different engineering challenge than at 20 or 22 inches. The increased rim diameter demands higher billet mass, more complex toolpaths during CNC machining, and precise spoke geometry calibrated for the load moment arms created by the larger rolling radius. LUMMA Design's in-house engineering verifies the CLR 24 RS against TÜV structural standards — ensuring that visual ambition does not compromise the safety margins that define a premium wheel. For vehicles already fitted with LUMMA body conversion programmes, the CLR 24 RS completes the build with a wheel scaled to match the proportions of extended arches and body widening.

Vehicle Fitment Guide — LUMMA CLR 24 RS

The CLR 24 RS is sized for flagship SUVs with air suspension or high ride height that can accommodate 24-inch rolling diameter:

• Land Rover Range Rover (L405, L460) — air suspension provides ride-height adjustment
• Mercedes-Benz GLE Coupe (C167) — E-Active Body Control / AIRMATIC variants
• BMW X7 (G07) — standard and M60i variants with adaptive suspension
• Audi Q8 / RSQ8 — air suspension with 24-inch approved fitments
• Porsche Cayenne Turbo (9YA, 9Y0) — with custom PCD 5×130 on request

For vehicles without air suspension, professional suspension consultation is recommended before specifying 24-inch fitments to confirm clearances and tyre profile compatibility.

Other Bolt Patterns Available

Standard 5×112 and 5×120 PCDs cover the majority of applications. LUMMA Design accepts custom PCD orders for 5×130, 5×108, and other configurations with approximately 6–10 week lead time.

LUMMA CLR 24 RS vs Other 24-Inch Forged Wheels

LUMMA Wheel Lineup — Explore the Full Range

• LUMMA CLR 22 LX — 22-inch monoblock forged wheel for flagship SUVs
• LUMMA CLR LN 1 BLACK — bold matte-black multi-spoke monoblock
• LUMMA F-UTU-R POLISHED — full forged monoblock with chrome-bolt finish
• LUMMA CLR RACING 2 — racing-inspired 23-inch forged monoblock
• LUMMA CLR 24 RS — 24-inch RS-spec monoblock for maximum presence
• LUMMA CLR RACING 21 — 21-inch sport fitment in the CLR Racing series
• Browse all forged wheels at Hodoor World

How to Order LUMMA CLR 24 RS Wheels

1. Choose your configuration — confirm diameter, width, PCD, and offset with our fitment team
2. Add to cart or contact us — vehicle clearance verified before confirming
3. Production lead time — typically 4–8 weeks for LUMMA forged wheels
4. Worldwide delivery — fully insured, tracked export cartons
5. Professional installation — TPMS transfer and wheel alignment at partner workshops

Frequently Asked Questions — LUMMA CLR 24 RS

Which vehicles can run 24-inch wheels safely?

Vehicles with air suspension (Range Rover, GLE, Q8) are best suited as they can adjust ride height to maintain clearance. Sport-suspension vehicles require professional consultation for tyre profile and arch clearance before ordering. Contact Hodoor World for a vehicle-specific fitment assessment.

Does a 24-inch wheel affect handling?

At 24 inches, the reduced tyre sidewall height decreases compliance, which can increase ride firmness on rough surfaces. For air-suspension vehicles the adaptive damping largely compensates. The larger unsprung mass also increases inertia, so performance-focused driving styles benefit from professional suspension recalibration.

Is the CLR 24 RS available without the RS specification?

The RS designation refers to LUMMA Design's specification programme for the 24-inch fitment. Contact Hodoor World for details on alternative LUMMA models available at 24 inches.

Is the TÜV certificate valid outside Germany?

Yes. TÜV part and firmness certificates are accepted across the EU under mutual type-approval agreements. For non-EU countries (UK, USA, Middle East), the certificate is typically accepted as a quality reference but local road authority requirements may vary.

Can the CLR 24 RS be wrapped or powder coated?

Yes, though LUMMA Design recommends using a specialist alloy wheel finisher to preserve structural integrity. Powder coating requires heat treatment that can affect some wheel surface coatings — confirm the process with a qualified refurbisher before proceeding.

LUMMA Design — German Tuning Expertise Since 1987

LUMMA Design GmbH is headquartered in Winterbach, Baden-Württemberg, Germany. Since its founding in 1987, the company has earned global recognition for precision-engineered tuning packages designed specifically for premium SUVs and luxury saloons. Every LUMMA component — body kits, carbon accents, and forged alloy wheels — is developed in-house and certified under TÜV standards, ensuring factory-level safety with dramatic visual results.

The CLR wheel range is integral to LUMMA's complete vehicle programme. Spoke geometry, offset, and centre bore are validated on actual LUMMA-converted cars before any model reaches production — meaning fewer fitment surprises and a more resolved final build compared to generic aftermarket wheels that approximate compatibility.

Can't Find the Right Wheel?

Hodoor offers a custom forged wheel manufacturing service for unique diameters, offsets, and finishes not covered by the standard LUMMA catalogue. Whether you need a one-off colour match, an uncommon PCD, or a bespoke width for a modified suspension setup, our team can source or manufacture it. You can also use our AI Wheel Design Service to visualise your concept before production begins.

Discover Hodoor World — Your Forged Wheel Specialist

Hodoor World is a specialist in premium forged wheels and high-end automotive accessories for luxury and performance vehicles. We maintain direct supplier relationships with leading manufacturers including LUMMA Design, Vossen, HRE, Brixton, ADV.1, and many more. Our team provides expert fitment advice, custom order management, and worldwide delivery.

Contact us via [email protected] or visit hodoor.world. Customer reviews are available on Trustpilot.

Wheel Care — Maintaining Your LUMMA Forged Wheels

Forged alloy wheels require routine care to preserve their surface finish and structural integrity. Wash with pH-neutral wheel cleaner and a soft brush after every 500 km or after exposure to road salt. Avoid abrasive compounds or machine polishing on coated surfaces. Inspect for kerb damage or stress cracks annually — LUMMA recommends professional inspection after any kerb impact above walking speed. Re-torque wheel bolts to OEM specification after the first 50 km post-fitment.

International Delivery

Hodoor World ships LUMMA wheels globally. All orders are individually wrapped, foam-lined, and packed in double-wall export cartons with full insurance and tracking. Typical transit: 3–5 days EU/UK, 7–14 days USA/Middle East/Asia. Import duties are the recipient's responsibility unless a DDP service is requested. Contact [email protected] for freight quotations on full sets.